Resource Library
Resource Library
The AquaVENT® FD140i dual gas flow driver is the only device specifically designed to deliver CPAP and HFOT. Designed for ease of use it delivers safe and effective CPAP and HFOT for Neonatal, Paediatric and Adult Patients.
User Guides
Promotional Materials
Case Studies
4:38
8:56
8:23
3:50
4:25
3:19
The AquaVENT® Heater Humidifier is used to warm and humidify gases delivered to patients who require respiratory support.
Promotional Materials
User Guide
Product Specification
Electrical Rating: Supply Frequency: 50-60Hz
Supply Voltage: 230V ± 23V
Supply Current: 1.0A max at 230V
Heater Plate: 150W
Wire Capacity: 60W
Digital display
Servo-controlled
Dimensions:W135mm x D170mm x H156mm (without chamber)
Weight: 2.9kg (without chamber)
3:04
AquaVENT® heated and humidified breathing circuits can be customised for both CPAP or High Flow, helping reduce clinical waste and streamline delivery of care.
Promotional Materials
3:04
1:17
Medical equipment and circuitry to deliver heated and humidified HFOT for perioperative applications.
Promotional Materials
8:03
5:58
4:13
6:23
3:46
3:49
1:53
1:56
1:31
An advanced ventilator circuit that intuitively manages moisture throughout the system allowing you to focus on the patient.
3:50
Promotional Materials
2:19
1:52
Promotional Materials
2:03
1:35
1:13
Metro Seal™ is a disposable, medical adhesive and thermoplastic elastomer, tube securement device.
Promotional Materials
Our transport ventilator circuits are manufactured for use with the majority transport ventilator systems including Dräger Oxylog® 1000, 2000, 3000 and 3000 plus, Smiths Pneupac® and paraPac® models.
Promotional Materials
Promotional Materials
3:04
We offer an extensive range of catheter mounts for anaesthesia and intensive care applications.
Promotional Materials
Ultra-PEP is used to mobilise secretions and thus assist with airway clearance.
1:34
The MaxVenturi has been specifically designed to work with high-flow humidification systems to deliver CPAP and HFOT to adults. Using the well-established Venturi principle, the MaxVenturi® to mix ambient air and oxygen without the need for piped medical grade air.
Promotional Materials
User Guides
Product Specification
• O₂ measurement Range: 0 to 100%
• Display Resolution: 0.1%
• Accuracy and Linearity: 1% of full scale at constant temperature, relative humidity, and pressure when calibrated at full scale
• Total Accuracy: ±3% actual oxygen level over full operating temperature range
• Response Time: 90% of final value in approximately 15 seconds at 23 ̊C
• No warm-up time required
• Operating Temperature: 15 ̊C to 40 ̊C (59 ̊F to 104 ̊F)
• Storage Temperature: -15 ̊C to 50 ̊C (5 ̊F to 122 ̊F)
• Atmospheric Pressure: 800 to 1013 mBars
• Humidity: 0 to 95% (non-condensing)
• Power Requirements: Two (2) AA alkaline batteries (2 x 1.5 volts)
• Battery Life: Approximately 5,000 hours with continuous use
• Low Battery Indication: Battery icon displayed on LCD
• Sensor Type: Maxtec MAX-250 Series galvanic fuel cell
• Expected Sensor Life: MAX-250E >1,500,000 O₂ percent hours minimum (around two years with standard medical usage)
• Dimensions: 7.3 ̋x 6.6 ̋x 5.3 ̋ (185 mm x 167 mm x 135 mm)
• Weight: 2.54 lbs (1152 grams)
• Drift of Measurement: < +/-1% of full scale at constant temperature, pressure and humidity.
3:13
Promotional Materials
Promotional Materials
0:33
We supply resuscitation limbs that deliver humidified gases to the baby needing stabilisation.
3:00
5:03
NeoFlow® Resuscitation Limbs are supplied with BioCote®, antimicrobial protection, protecting it from microbial colonisation.
Designed to provide a secure seal with minimum pressure on sensitive skin. Neoflow® resuscitation masks are available in 4 sizes ranging from neonate to small child.
4:04
Delivery Room CPAP or DR CPAP is the use of Continuous Positive Airway Pressure therapy immediately after birth in the delivery suite or labour ward.
2:57
1:43
5:03
NeoFlow® Neonatal CPAP Systems are designed to enable easy transition to and from nCPAP, bubble CPAP and invasive ventilation.
User Guides
Promotional Materials
2:09
NeoFlow® Neonatal Nasal High Flow Oxygen Systems are designed to enable easy transition to and from nCPAP, bubble CPAP and invasive ventilation.
1:43
NeoFlow® VT, advanced neonatal ventilator circuits that intuitively manage moisture throughout the system, reach the optimum therapy delivery quickly and maintain it consistently.
4:47
2:06
NeoFlow® blender can be connected to any neonatal resuscitator for accurate control of flow and O₂ concentration.
Promotional Materials
AMSORB® Plus absorbs carbon dioxide from cellular respiration during anaesthesia.
Promotional Materials
The MaxVenturi has been specifically designed to work with high-flow humidification systems to deliver CPAP and HFOT to adults. Using the well-established Venturi principle, the MaxVenturi® to mix ambient air and oxygen without the need for piped medical grade air.
User Guides
Product Specification
• O₂ measurement Range: 0 to 100%
• Display Resolution: 0.1%
• Accuracy and Linearity: 1% of full scale at constant temperature, relative humidity, and pressure when calibrated at full scale
• Total Accuracy: ±3% actual oxygen level over full operating temperature range
• Response Time: 90% of final value in approximately 15 seconds at 23 ̊C
• No warm-up time required
• Operating Temperature: 15 ̊C to 40 ̊C (59 ̊F to 104 ̊F)
• Storage Temperature: -15 ̊C to 50 ̊C (5 ̊F to 122 ̊F)
• Atmospheric Pressure: 800 to 1013 mBars
• Humidity: 0 to 95% (non-condensing)
• Power Requirements: Two (2) AA alkaline batteries (2 x 1.5 volts)
• Battery Life: Approximately 5,000 hours with continuous use
• Low Battery Indication: Battery icon displayed on LCD
• Sensor Type: Maxtec MAX-250 Series galvanic fuel cell
• Expected Sensor Life: MAX-250E >1,500,000 O₂ percent hours minimum (around two years with standard medical usage)
• Dimensions: 7.3 ̋x 6.6 ̋x 5.3 ̋ (185 mm x 167 mm x 135 mm)
• Weight: 2.54 lbs (1152 grams)
• Drift of Measurement: < +/-1% of full scale at constant temperature, pressure and humidity.
Promotional Materials
3:13
A simple but effective draping system to prevent patient heat loss and associated hypothermia.
Promotional Materials
AquaVENT® FD140i is suitable for use with all ages and sizes of patients treated in a paediatric department.
Promotional Materials
2:44
2:45
3:55
A range of bone cement mixing and delivery tools to enable theatre staff to produce high quality cement; critical to long-term joint survival.
Promotional Materials
1:42
Neria™ Guard is an all-in-one soft infusion set with an integrated one touch inserter. With a unique, automatically retracting needle, Neria Guard™ can help minimise complications and improve insertion comfort.
The Single Use Callisto system looks and feels like a reusable fibre optic blade at a disposable price.
