AquaVENT® Heater Humidifier Setup
1
Switch on Heater Humidifier with button on the right side. Heater will carry out a short self check.
2
Heater will default to ‘Invasive Mode’. Green light will be visible beside the Invasive Mode icon.
3
The Heater Humidifier will lock automatically after 2 mins. To unlock and lock, press and hold the ‘Function’ button for 3 seconds. Confirmation on the screen will display LOCK or UNLK.
4
Switch between Invasive and Non-invasive modes by pressing the ‘Mode’ button when the device is unlocked.
5
To change Temperature display, press the ‘Function’ button when the device is unlocked. Select from Chamber Temperature,
6
Heater Plate Temperature (used for testing the device), or
7
Airway Temperature Mode.
8
When all settings have been set, lock the device my pressing and holding the ‘Function’ button again for 3 seconds.
9
Should an alarm sound, the issue will be highlighted by a red light beside the error description on the left of the device.
10
Press ‘Mute’ to temporarily silence the alarm while the error is resolved.
