Skip to content

AquaVENT® FD140i Setup

1

Connect device to mains power and press standby push button on membrane to power on.

3D rendering of the AquaVENT FD140i turned off
2

Option to calibrate paramagnetic oxygen sensor on startup

3D rendering of the AquaVENT FD140i oxygen sensor being calibrated
3

Select required therapy mode. Border around selected mode is black. Press OK to proceed to therapy setup

3D rendering of the AquaVENT FD140i menu screen with CPAP selected
4

Use pointer icon to adjust flow setting and /or oxygen concentration to approx. level. Use +/- buttons for incremental adjustment. Mode limits defined with limit icons. Press OK to proceed.

3D rendering of the AquaVENT FD140i CPAP Flow setting screen
5

Adjust Pmax and Pmin values with pointer and +/- buttons. Set Apnoea and Fmax icons. Press OK to proceed.

5fbfc4e94dc76CPAP Mode 7 Armstrong Medical | Medical Device Manufacturer
6

Press the ‘Play button to start therapy. Therapy menu allows: real time monitoring of respiratory activity, access to adjust flow and alarm settings & nebuliser activation.

3D rendering of the AquaVENT FD140i CPAP screen
7

Confirm action by pressing green tick.

3D rendering of the AquaVENT FD140i CPAP Start Therapy screen
8

Therapy has begun and the Start Therapy ‘play’ button has now changed to a Stop Therapy ‘X’

3D rendering of the AquaVENT FD140i CPAP screen
9

Press flow settings button to access flow settings

3D rendering of the AquaVENT FD140i CPAP screen with the litres per min highlighted
10

Adjust Flow & Oxygen settings using the +/- buttons or dragging the hand icons. Press OK to return to the therapy screen.

3D rendering of the AquaVENT FD140i CPAP flow setting screen
11

New settings will be presented on the Flow Settings section of the screen.

3D rendering of the AquaVENT FD140i CPAP screen
12

Press alarm settings button to access alarm settings

3D rendering of the AquaVENT FD140i CPAP screen with the alarm highlighted
13

Adjust Alarm settings using the +/- buttons or dragging the hand icons. Press OK to return to the therapy screen.

3D rendering of the AquaVENT FD140i CPAP alarm settings screen
14

Press nebuliser button to activate nebuliser. Nebuliser button will change to green when active. Press nebuliser button again to deactivate.

3D rendering of the AquaVENT FD140i CPAP screen
15

Press general settings button to access menu

3D rendering of the AquaVENT FD140i CPAP screen with settings highlighted
16

Adjust as required. Press return icon to revert to Therapy menu

3D rendering of the AquaVENT FD140i settings screen with the step back button highlighted
17

Device locks if screen or membrane buttons are not activated for 1 min. Press screen locked icon to unlock the device.

3D rendering of the AquaVENT FD140i CPAP screen with the lock icon highlighted
18

Confirm unlock screen

3D rendering of the AquaVENT FD140i unlock screen mode