Skip to content

AquaVENT® FD140i Mode Setup

1

Connect device to mains power and press standby push button on membrane to power on.

3D rendering of the AquaVENT FD140i turned off
2

Option to calibrate paramagnetic oxygen sensor on startup.

3D rendering of the AquaVENT FD140i oxygen sensor being calibrated
3

Select required therapy mode. Border around selected mode is black. Press OK to proceed to therapy setup.

3D rendering of the AquaVENT FD140i menu screen
4

Use pointer icon to adjust flow setting and /or oxygen concentration to approx. level. Use +/- buttons for incremental adjustment. Mode limits defined with limit icons. Press OK to proceed.

3D rendering of the AquaVENT FD140i HFOT flow setting screen
5

Press the Play button to start therapy. Therapy menu allows: real time monitoring of respiratory activity, access to adjust flow and alarm settings.

3D rendering of the AquaVENT FD140i HFOT mode screen
6

Confirm action by pressing green tick.

3D rendering of the AquaVENT FD140i with the HFOT Therapy start screen
7

Therapy has begun and the Start Therapy ‘play’ button has now changed to a Stop Therapy ‘X’.

3D rendering of the AquaVENT FD140i HFOT screen
8

Press flow settings button to access flow settings.

3D rendering of the AquaVENT FD140i HFOT screen
9

Adjust Flow & Oxygen settings using the +/- buttons or dragging the hand icons. Press OK to return to the therapy screen.

3D rendering of the AquaVENT FD140i HFOT flow setting screen
10

New settings will be presented on the Flow Settings section of the screen.

3D rendering of the AquaVENT FD140i HFOT screen
11

Press general settings button to access menu.

5fbfb110565c0Slide14 Armstrong Medical | Medical Device Manufacturer
12

Adjust as required. Press return icon to revert to Therapy menu.

3D rendering of the AquaVENT FD140i settings screen
13

Device locks if screen or membrane buttons are not activated for 1 min. Press screen locked icon to unlock the device.

3D rendering of the AquaVENT FD140i HFOT screen
14

Confirm unlock screen.

3D rendering of the AquaVENT FD140i unlock screen mode